Woodworking in Connecticut: Wood Moisture and Outdoor Builds
Month-by-month outdoor wood moisture for 2 places in Connecticut, from 10.8% in Hartford in April to 13.5% in Bridgeport in September, and what it means for buying lumber, gluing up and finishing.
Wood trades moisture with the air around it until it reaches a balance called the equilibrium moisture content (EMC). The numbers on this page are the average EMC of wood kept outdoors under cover (out of direct rain and sun) for each month, calculated by the USDA Forest Products Laboratory from at least 30 years of NOAA humidity and temperature records. Wood that gets rained on will be wetter for a while; wood inside a heated or air-conditioned house will be drier. The general advice below uses Hartford as the reference city.
Outdoor wood moisture in Connecticut, month by month
| Month | Hartford | Bridgeport |
|---|---|---|
| Jan | 12.0% | 12.6% |
| Feb | 11.9% | 12.3% |
| Mar | 11.6% | 12.2% |
| Apr | 10.8% | 11.8% |
| May | 11.1% | 12.6% |
| Jun | 11.8% | 13.0% |
| Jul | 11.9% | 12.9% |
| Aug | 12.6% | 13.0% |
| Sep | 13.3% | 13.5% |
| Oct | 12.7% | 13.1% |
| Nov | 12.8% | 13.0% |
| Dec | 12.9% | 12.7% |
| Year | 12.1% | 12.7% |
City by city
Each city below gets its own numbers and advice. Deck board figures are for a 5½-inch flat-sawn pine board going from the wettest to the driest month.
Woodworking in Hartford: wood moisture by month
- 12.1%Year average
- 10.8%Driest: Apr
- 13.3%Wettest: Sep
- 1/32 in.Deck board movement
Outdoor wood ranges from 10.8% in April to 13.3% in September, averaging 12.1%, close to the Handbook's 12% target for exterior wood. The driest months, March, April and May, are the best time for staining and painting.
Woodworking in Bridgeport: wood moisture by month
- 12.7%Year average
- 11.8%Driest: Apr
- 13.5%Wettest: Sep
- 1/32 in.Deck board movement
Moisture barely changes through the year (11.8% to 13.5%), so seasonal movement is small. The main job is letting yard lumber dry toward 12.7% before you build. On average it is 0.6 points wetter than Hartford. The driest months, February, March and April, are the best time for staining and painting (check the can's minimum temperature if it is cold then).
What moisture content to aim for
The Wood Handbook's rule is to install wood at the moisture content it will live at, so it moves as little as possible afterward. In Hartford the year-round outdoor average is 12.1%.
- Outdoor projects (decks, benches, planters, siding and trim): the Handbook recommends an average of 12% (individual pieces 9% to 14%), the Handbook's figure for most of the United States.
- Indoor furniture and trim: about 8% (6% to 10%), the figure for most of the country.
A pin or pinless moisture meter takes the guesswork out. Check a few boards from each batch, not just one.
How much a deck board moves here
Using the Wood Handbook's shrinkage coefficient for flat-sawn loblolly pine (a common treated-lumber species; Table 13-5), a board 5½ inches wide, the width of a 2x6 or a 5/4 deck board, changes width by:
| Change | Moisture change | Width change |
|---|---|---|
| Wettest to driest month | 13.3% to 10.8% | about 1/32 inch |
| From 19% ("dry" lumber) to the local average | 19% to 12.1% | about 3/32 inch |
These are estimates: real boards are rarely perfectly flat-sawn, and western redcedar moves about 10% less than pine. The point is the direction. Lumber bought at 19% will shrink, so gaps between deck boards installed tight will open as it dries.
Acclimating lumber in Connecticut
- Bring it home early. Buy lumber a week or more before you build.
- Stack it with stickers. Lay straight spacer strips every couple of feet between layers so air reaches every face, and keep the pile off the ground.
- Store it where the project will live. Outdoors under cover for outdoor projects; inside the house for indoor furniture.
- Measure, don't guess. When moisture meter readings stop changing from one day to the next, the wood is ready.
A moderate, fairly steady climate
Outdoor wood in Hartford stays between 10.8% and 13.3% all year, close to the Handbook's 12% target for exterior wood. The bigger risk here is not the climate but the lumber: framing lumber can leave the yard at up to 19%, and treated lumber is often wetter. Let it dry under cover before you build, and don't move indoor furniture stock straight from a cold garage into a heated house and start cutting.
Woods and finishes that hold up outdoors
For anything left outside, choose wood that resists decay or wood treated for it. The Wood Handbook's Table 14-1 rates the heartwood of the cedars (including western redcedar), white oaks, black locust and old-growth redwood as resistant or very resistant, Douglas-fir and young-growth redwood as moderately resistant, and most pines, spruces and firs as slightly or not resistant. Use pressure-treated lumber rated for ground contact for posts and anything touching soil.
From the Handbook's Table 16-5: a water-repellent preservative typically lasts 1 to 3 years, semitransparent stain 4 to 8 years on rough-sawn or weathered wood, solid-color stain 6 to 15 years and paint 10 to 20 years. Clear varnish is a poor choice for furniture left in the sun; it generally needs refinishing every 1 to 2 years there.
Best months for outdoor builds and finishing
In Hartford, outdoor wood is driest in March, April and May and wettest in September, November and December. Lumber dries fastest, and finishes go onto dry wood, in the drier months, so plan staining and painting for then. Avoid sealing wood during the wettest stretch, when it is holding the most moisture it will hold all year. If those months are cold, check the minimum application temperature on the can before you finish. The city sections above give the driest months for each city.
Keep reading
- The actual size of a 2x4, and why it matters
- Why your woodworking project doesn't fit
- How to build an Adirondack chair
Deciding what to build this season? Start with our list of 9 things worth building instead of buying.
Sources
- Monthly EMC for Hartford and Bridgeport: Simpson, W.T. 1998. Equilibrium moisture content of wood in outdoor locations in the United States and worldwide. FPL-RN-0268, Table 2
- How we got the numbers: Simpson's Table 2 is printed as a scanned image, so we transcribed it from a high-resolution render and read every value three independent ways (two separate text-recognition passes and a visual check). All three agreed on every value, and for the cities that also appear in the Handbook's text table the values match it exactly.
- Both tables were calculated by the Forest Products Laboratory from NOAA National Climatic Data Center records (Comparative Climatic Data): the average of morning and afternoon relative humidity and the normal daily temperature for each month, mostly from at least 30 years of observations.
- Recommended moisture content (Table 13-2, Figure 13-1), shrinkage coefficients (Table 13-5), decay resistance (Table 14-1) and finish service life (Table 16-5): Wood Handbook (FPL-GTR-190)