Woodworking in Nevada: Wood Moisture and Outdoor Builds
Month-by-month outdoor wood moisture for 5 places in Nevada, from 4.0% in Las Vegas in June to 13.3% in Elko in January, and what it means for buying lumber, gluing up and finishing.
Wood trades moisture with the air around it until it reaches a balance called the equilibrium moisture content (EMC). The numbers on this page are the average EMC of wood kept outdoors under cover (out of direct rain and sun) for each month, calculated by the USDA Forest Products Laboratory from at least 30 years of NOAA humidity and temperature records. Wood that gets rained on will be wetter for a while; wood inside a heated or air-conditioned house will be drier. The general advice below uses Las Vegas as the reference city.
Outdoor wood moisture in Nevada, month by month
| City | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Year |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Las Vegas | 8.5 | 7.7 | 7.0 | 5.5 | 5.0 | 4.0 | 4.5 | 5.2 | 5.3 | 5.9 | 7.2 | 8.4 | 6.2 |
| Elko | 13.3 | 12.5 | 11.1 | 10.0 | 9.5 | 8.7 | 7.3 | 7.4 | 8.0 | 9.1 | 11.8 | 13.2 | 10.2 |
| Ely | 12.2 | 11.8 | 10.9 | 9.7 | 9.3 | 8.0 | 7.2 | 7.7 | 8.0 | 9.2 | 10.9 | 11.9 | 9.7 |
| Reno | 12.3 | 10.7 | 9.7 | 8.8 | 8.8 | 8.2 | 7.7 | 7.9 | 8.4 | 9.4 | 10.9 | 12.3 | 9.6 |
| Winnemucca | 12.9 | 11.7 | 10.4 | 9.1 | 8.7 | 7.7 | 6.1 | 6.3 | 7.2 | 8.7 | 11.3 | 13.2 | 9.4 |
City by city
Each city below gets its own numbers and advice. Deck board figures are for a 5½-inch flat-sawn pine board going from the wettest to the driest month.
Woodworking in Las Vegas: wood moisture by month
- 6.2%Year average
- 4.0%Driest: Jun
- 8.5%Wettest: Jan
- 1/16 in.Deck board movement
The air is very dry: outdoor wood averages only 6.2%, so lumber sold at up to 19% has about 3/16 inch of shrinking left across a 5½-inch board. Let it sit for a few weeks before cutting joints, and expect gaps to open. The driest months, May, June and July, are the best time for staining and painting.
Woodworking in Elko: wood moisture by month
- 10.2%Year average
- 7.3%Driest: Jul
- 13.3%Wettest: Jan
- 3/32 in.Deck board movement
Wood here swings 6.0 points, from 13.3% in January down to 7.3% in July, enough to change a 5½-inch deck board's width by about 3/32 inch. Fasten tabletops and wide panels so they can move. On average it is 4.0 points wetter than Las Vegas. The driest months, July, August and September, are the best time for staining and painting.
Woodworking in Ely: wood moisture by month
- 9.7%Year average
- 7.2%Driest: Jul
- 12.2%Wettest: Jan
- 1/16 in.Deck board movement
Outdoor wood runs drier than the Handbook's 12% exterior target, averaging 9.7% (7.2% in July to 12.2% in January), so expect fresh lumber to shrink as it settles. On average it is 3.5 points wetter than Las Vegas. The driest months, June, July and August, are the best time for staining and painting.
Woodworking in Reno: wood moisture by month
- 9.6%Year average
- 7.7%Driest: Jul
- 12.3%Wettest: Jan, Dec
- 1/16 in.Deck board movement
Outdoor wood runs drier than the Handbook's 12% exterior target, averaging 9.6% (7.7% in July to 12.3% in January and December), so expect fresh lumber to shrink as it settles. On average it is 3.4 points wetter than Las Vegas. The driest months, June, July and August, are the best time for staining and painting.
Woodworking in Winnemucca: wood moisture by month
- 9.4%Year average
- 6.1%Driest: Jul
- 13.2%Wettest: Dec
- 3/32 in.Deck board movement
Wood here swings 7.1 points, from 13.2% in December down to 6.1% in July, enough to change a 5½-inch deck board's width by about 3/32 inch. Fasten tabletops and wide panels so they can move. On average it is 3.2 points wetter than Las Vegas. The driest months, July, August and September, are the best time for staining and painting.
What moisture content to aim for
The Wood Handbook's rule is to install wood at the moisture content it will live at, so it moves as little as possible afterward. In Las Vegas the year-round outdoor average is 6.2%.
- Outdoor projects (decks, benches, planters, siding and trim): the Handbook recommends an average of 9% (individual pieces 7% to 12%), the Handbook's figure for the dry Southwest.
- Indoor furniture and trim: about 6% (4% to 9%), the dry-Southwest zone on the Handbook's map.
A pin or pinless moisture meter takes the guesswork out. Check a few boards from each batch, not just one.
How much a deck board moves here
Using the Wood Handbook's shrinkage coefficient for flat-sawn loblolly pine (a common treated-lumber species; Table 13-5), a board 5½ inches wide, the width of a 2x6 or a 5/4 deck board, changes width by:
| Change | Moisture change | Width change |
|---|---|---|
| Wettest to driest month | 8.5% to 4.0% | about 1/16 inch |
| From 19% ("dry" lumber) to the local average | 19% to 6.2% | about 3/16 inch |
These are estimates: real boards are rarely perfectly flat-sawn, and western redcedar moves about 10% less than pine. The point is the direction. Lumber bought at 19% will shrink, so gaps between deck boards installed tight will open as it dries.
Acclimating lumber in Nevada
- Bring it home early. Buy lumber a week or more before you build.
- Stack it with stickers. Lay straight spacer strips every couple of feet between layers so air reaches every face, and keep the pile off the ground.
- Store it where the project will live. Outdoors under cover for outdoor projects; inside the house for indoor furniture.
- Measure, don't guess. When moisture meter readings stop changing from one day to the next, the wood is ready.
Dry air: expect lumber to keep shrinking
Outdoor wood in Las Vegas settles well below 19%, the most moisture that lumber stamped dry is allowed to hold. Boards bought near that limit will shrink noticeably before they stop moving, so let them sit for a few weeks before tight joinery, expect gaps between deck boards installed tight to open as the boards dry, and expect joints and paint lines to show some movement in the first season.
A big swing between seasons
Parts of Nevada have wet winters and dry summers. In Elko outdoor wood reaches 13.3% in January, and in Las Vegas it drops to 4.0% in June. Wide boards, glued-up panels and tight joints feel this most. Fasten tabletops and wide panels so they can move, and avoid gluing wide boards edge to edge with their grain crossed.
Woods and finishes that hold up outdoors
For anything left outside, choose wood that resists decay or wood treated for it. The Wood Handbook's Table 14-1 rates the heartwood of the cedars (including western redcedar), white oaks, black locust and old-growth redwood as resistant or very resistant, Douglas-fir and young-growth redwood as moderately resistant, and most pines, spruces and firs as slightly or not resistant. Use pressure-treated lumber rated for ground contact for posts and anything touching soil.
In strong sun and dry air, film finishes crack and peel sooner; the Handbook notes clear varnish in direct sunlight generally needs refinishing every 1 to 2 years. Pigmented finishes protect the wood from sunlight better: semitransparent stain typically lasts 4 to 8 years on rough-sawn or weathered wood, solid-color stain 6 to 15 years and paint 10 to 20 years.
Best months for outdoor builds and finishing
In Las Vegas, outdoor wood is driest in May, June and July and wettest in January, February and December. Lumber dries fastest, and finishes go onto dry wood, in the drier months, so plan staining and painting for then. Avoid sealing wood during the wettest stretch, when it is holding the most moisture it will hold all year. The city sections above give the driest months for each city.
Keep reading
- The actual size of a 2x4, and why it matters
- Why your woodworking project doesn't fit
- How to build an Adirondack chair
Deciding what to build this season? Start with our list of 9 things worth building instead of buying.
Sources
- Monthly EMC for Las Vegas and Reno: USDA Forest Products Laboratory, Wood Handbook (FPL-GTR-190), Table 13-1. The same values appear in Simpson 1998, Table 2.
- Monthly EMC for Elko, Ely and Winnemucca: Simpson, W.T. 1998. Equilibrium moisture content of wood in outdoor locations in the United States and worldwide. FPL-RN-0268, Table 2
- How we got the numbers: Simpson's Table 2 is printed as a scanned image, so we transcribed it from a high-resolution render and read every value three independent ways (two separate text-recognition passes and a visual check). All three agreed on every value, and for the cities that also appear in the Handbook's text table the values match it exactly.
- Both tables were calculated by the Forest Products Laboratory from NOAA National Climatic Data Center records (Comparative Climatic Data): the average of morning and afternoon relative humidity and the normal daily temperature for each month, mostly from at least 30 years of observations.
- Recommended moisture content (Table 13-2, Figure 13-1), shrinkage coefficients (Table 13-5), decay resistance (Table 14-1) and finish service life (Table 16-5): Wood Handbook (FPL-GTR-190)